Đăng ký một lần, sử dụng tất cả các tài nguyên của hệ thống choyte.com : Xem báo giá, tải tài liệu, đăng rao vặt, hỏi đáp...
Máy điện tim CARDIOVIT AT-2 Schiller
Tiêu chuẩn
- Tải Báo giá - Tài liệu
- Giới thiệu
- Thông số kĩ thuật
- Cấu hình
- Phụ kiện
- Nhận xét
- Sản phẩm cùng phân khúc giá
- Máy điện tim 6 kênh sử dụng công nghệ sản suất và thiết kế tân tiến, cung cấp bản in A4 với nút bấm cảm ứng hoạt động nhanh và chính xác với 12 đạo trình phân tích, phương thức 3 kênh.
- Bản in kết quả A4 phù hợp với biểu đồ bệnh nhân
- Pin hoạt động dùng cho 400 bản in hoặc sử dụng liên tục trong 6 giờ
- Máy in tích hợp
- Lên tới 20 phương thức in
- In 6 kênh với 5, 10, 25 lệnh 50mm/s
- Bản in kết quả A4 phù hợp với biểu đồ bệnh nhân
- Pin hoạt động dùng cho 400 bản in hoặc sử dụng liên tục trong 6 giờ
- Máy in tích hợp
- Lên tới 20 phương thức in
- In 6 kênh với 5, 10, 25 lệnh 50mm/s
System:
Dimensions: 400 x 330 x 101 mm, approx. 4.8 kg
Power supply requirements: 220 – 240 V (nominal), 50/60 Hz or 100 – 115 V
(nominal), 50/60 Hz independent operation with built-in rechargeable battery,
LED indication for mains and battery, built-in charger unit
Power consumption: Max. 28 VA
Battery charging time: 15 hrs. from a completely discharged battery,
3 hrs. to 60 % capacity
Battery capacity: 6 hrs. of normal use or 400 automatic ECG printouts
Frequency range of digital recorder: 0 Hz – 150 Hz (IEC/AHA)
Patient input circuitry: Fully floating and isolated, defibrillation protected
(only with original SCHILLER patient cable)
Control panel and keyboard: User-friendly key pad, LED indicators
LED indicators:
- Lead group
- Mains connected
- Battery operation and low battery (indicator flashes)
- Paper tray empty or jammed
- Filter status (on/off)
- Loose electrodes
Leads: 12 simultaneous leads: Standard / Cabrera
Myogram (muscle tremor) filter: Adjustable at 25 or 35 Hz (also for
copy function)
Line frequency filter: Distortion-free suppression of superimposed
50 or 60 Hz sinusoidal interferences by means of adaptive digital filtering
ECG amplifier:
- Simultaneous, synchronous recording of all 9 active electrode signals
(= 12 leads)
- Sampling frequency: 1000 Hz
- Pacemaker detection: Amplitudes from ± 2 to ± 700 mV and pulse widths
from 0.1 to 2.0 ms
Printing (built-in thermal printer):
Paper speed: 5 / 25 / 50 mm/s (manual printout)
Sensitivities: 5 / 10 / 20 mm/mV, either automatically adjusted or
manually selected
Chart paper: Thermoreactive, Z-folded, A4 (letter size), perforation each
page, approx. 60 m
Printing process:
- High-resolution thermal printhead
- 8 dots per mm / 200 dots per inch (amplitude axis)
- 40 dots per mm / 1000 dots per inch (time axis) @ 25 mm/s
Automatic lead programs:
6/12 channel representation of 12 simultaneously acquired standard leads
on one or two pages, full letter size (A4)
Data record:
- With optional measurement and interpretation program: ECG measurement
results (intervals, amplitudes, electrical axes), average complexes with
optional measurement reference markings, ECG interpretation statements
- Various format possibilities
Recording tracks: 6 channels, positioned at optimal width on 200 mm,
automatic baseline adjustment
Norms:
Safety standard: CF according to IEC/EN 60601-1 and IEC/EN 60601-2-25,
CSA C22.2 No. 601.1-M90, UL 2601-1
Protection class: I according to IEC/EN 60601-1 (with internal battery)
Classification: lla according MDD 93/42/EEC
Conformity: according to MDD 93/42/EEC
Environmental conditions:
- Temperature, operating: 10° to 40° C / 50° to 104° F
- Temperature, storage: -10° to 50° C / 14° to 122° F
- Relative humidity, operating: 25 to 95 % (non-condensing)
- Pressure, operating: 700 to 1060 hPa
Patient leakage current: < 5 µA
Scope of delivery:
CARDIOVIT AT-2 basic unit with 12-lead Resting ECG
Accessories:
- 10-lead patient cable
- 500 disposable electrodes or reusable electrode set
- Snapclip adapter for disposable electrodes
- Power cable
- 2 pkg. of recording paper
- Operating manual
- Cart (optional)
Software option: Automatic measurement and interpretation program for
Resting ECGs (intervals, amplitudes, electrical axes, average complexes with
optional measurement reference markings)
Technical data are subject to change without notice.
Dimensions: 400 x 330 x 101 mm, approx. 4.8 kg
Power supply requirements: 220 – 240 V (nominal), 50/60 Hz or 100 – 115 V
(nominal), 50/60 Hz independent operation with built-in rechargeable battery,
LED indication for mains and battery, built-in charger unit
Power consumption: Max. 28 VA
Battery charging time: 15 hrs. from a completely discharged battery,
3 hrs. to 60 % capacity
Battery capacity: 6 hrs. of normal use or 400 automatic ECG printouts
Frequency range of digital recorder: 0 Hz – 150 Hz (IEC/AHA)
Patient input circuitry: Fully floating and isolated, defibrillation protected
(only with original SCHILLER patient cable)
Control panel and keyboard: User-friendly key pad, LED indicators
LED indicators:
- Lead group
- Mains connected
- Battery operation and low battery (indicator flashes)
- Paper tray empty or jammed
- Filter status (on/off)
- Loose electrodes
Leads: 12 simultaneous leads: Standard / Cabrera
Myogram (muscle tremor) filter: Adjustable at 25 or 35 Hz (also for
copy function)
Line frequency filter: Distortion-free suppression of superimposed
50 or 60 Hz sinusoidal interferences by means of adaptive digital filtering
ECG amplifier:
- Simultaneous, synchronous recording of all 9 active electrode signals
(= 12 leads)
- Sampling frequency: 1000 Hz
- Pacemaker detection: Amplitudes from ± 2 to ± 700 mV and pulse widths
from 0.1 to 2.0 ms
Printing (built-in thermal printer):
Paper speed: 5 / 25 / 50 mm/s (manual printout)
Sensitivities: 5 / 10 / 20 mm/mV, either automatically adjusted or
manually selected
Chart paper: Thermoreactive, Z-folded, A4 (letter size), perforation each
page, approx. 60 m
Printing process:
- High-resolution thermal printhead
- 8 dots per mm / 200 dots per inch (amplitude axis)
- 40 dots per mm / 1000 dots per inch (time axis) @ 25 mm/s
Automatic lead programs:
6/12 channel representation of 12 simultaneously acquired standard leads
on one or two pages, full letter size (A4)
Data record:
- With optional measurement and interpretation program: ECG measurement
results (intervals, amplitudes, electrical axes), average complexes with
optional measurement reference markings, ECG interpretation statements
- Various format possibilities
Recording tracks: 6 channels, positioned at optimal width on 200 mm,
automatic baseline adjustment
Norms:
Safety standard: CF according to IEC/EN 60601-1 and IEC/EN 60601-2-25,
CSA C22.2 No. 601.1-M90, UL 2601-1
Protection class: I according to IEC/EN 60601-1 (with internal battery)
Classification: lla according MDD 93/42/EEC
Conformity: according to MDD 93/42/EEC
Environmental conditions:
- Temperature, operating: 10° to 40° C / 50° to 104° F
- Temperature, storage: -10° to 50° C / 14° to 122° F
- Relative humidity, operating: 25 to 95 % (non-condensing)
- Pressure, operating: 700 to 1060 hPa
Patient leakage current: < 5 µA
Scope of delivery:
CARDIOVIT AT-2 basic unit with 12-lead Resting ECG
Accessories:
- 10-lead patient cable
- 500 disposable electrodes or reusable electrode set
- Snapclip adapter for disposable electrodes
- Power cable
- 2 pkg. of recording paper
- Operating manual
- Cart (optional)
Software option: Automatic measurement and interpretation program for
Resting ECGs (intervals, amplitudes, electrical axes, average complexes with
optional measurement reference markings)
Technical data are subject to change without notice.
Tiêu chuẩn
Tiêu chuẩn
Sản phẩm cùng chuyên mục
Sản phẩm được quan tâm nhất
